Types of lubricants used in automobiles

There are many types of car lubricants and choosing the right one can help you ensure that your car parts are not destroyed. You want to do your research and choose the right lubricant company to find the right fit.

Motor oil

Motor oil is a very common type of automotive oil used. Vehicle manufacturers recommend that you replace motor oil every 3,000 to 5,000 miles. Certain additives are used that help prevent any breakdown and corrosion of the parts. There are also different types of viscosity, which is the thickness of the oil. Small numbers indicate that the oil is thinner, making it easier to flow. It is recommended that when changing your oil, you choose a multi-grade oil so that you can maintain the viscosity index when the oil is at different temperatures. There are many lubricating oil suppliers to choose from, so make sure you choose the right one for your vehicle.

gear oil

This oil is typically used in manual transmissions and when high temperature lubricant is needed. This type of oil has a noticeable odor so you can detect a leak.

transmission fluid

This type of fluid can help prevent many problems. It will help lubricate transmission parts and help cool the transmission to prevent engine corrosion. You should check the transmission fluid with the vehicle running and with the car on a flat, level surface. There is a bright color to help detect leaks. You can check the transmission fluid with the dipstick located near the back of the engine compartment.

Wheel and chassis bearing grease

This is the common automotive grease used and probably the most recognizable. It can be found in suspension and steering joints. This grease is necessary to prevent excessive wear on the suspension. To properly lubricate your suspension, you can find this grease in a tube that can be added to a grease gun. Then this grease gun will be attached to the grease fittings, and the grease fittings are the areas that need lubrication. This grease should not be used in vehicles with disc brakes because it is not a high temperature grease.

High temperature wheel bearing grease

Use this type for areas that have high temperatures. This is the type of grease you should use with disc brakes. This grease will contain an additive that will help it remain slippery, even when the grease is dry.

white fat

This grease is used for metal applications where water could be a problem. Water cannot wash this grease away and it cannot be thinned, making it good for use in high-temperature areas.

electronic grease

Also called heat sink grease, this grease does not conduct electricity and is therefore used in electronic connections.

Penetrating Lubricants

This lubricating oil helps loosen rusted and corroded bolts and nuts and can be found in a spray can. It should be soaked after application. Once soaked, the treads should be clean and then reapplied to free the bolts and nuts.


This should be used to help lubricate any parts that should not be exposed to oils. A common place where this should be used is interior locks.

It is important to listen to the recommendations of automotive oil manufacturers about which lubricants to use and where. It is important to choose the type and grade of lubricant that is needed. The brand doesn’t matter, but there are some good brands to consider, including Shield Lubricants and Kuwait Oil.

Leave a Reply

Your email address will not be published. Required fields are marked *